ua
GOUT/URIC ACID TESTING

The UASure Handheld blood uric acid monitor.
More information is available here.

These are available VAT Free to those able to claim VAT Exemption in the UK (UK Residents only) (exemption form required)
!

UASure Gout - Blood Uric Acid Kit

U3003
!

The UASure Blood Uric Acid monitoring system is the first hand-held, self monitoring uric acid meter on the market. 

It is designed to provide an easy and accurate method to monitor your level of uric acid in capillary blood.   

The detection of asymptomatic hyperuricemia is important in order to prevent the risk of developing renal disease.

This kit ONLY contains:
meter, battery, monitor checker, 5 strips, code card, 5 lancets, lancing device, users guide, log book, wallet.

UASure Gout - Uric Acid Test Strips

U3601
!
For use with the UASure Uric Acid Meter.
(box of 25 with code chip)
Each box of 25 comes with its own code chip which fits in the back of the meter. 
For acurate readings, this must be inserted (after removing the previous one) when you start a new box of strips.

The maximum shelf life is 12 months.

UASure Control Solution (optional)

U3500
!

The standard uric acid concentration solution is used to perform the "Quality Control Testing” (see Chapter 2, p.13 of the handbook) to check for system accuracy, to practice the test procedure, and when using a new lot of UASure® Blood Uric Acid Test Strips.

Perform Quality Control Testing:

  • When you first get your meter, before performing a blood uric acid test.
  • When you first begin to use a new package of UASure® Blood Uric Acid Test Strips.
  • When you suspect your UASure® Blood Uric Acid meter and test strips are not working properly.
  • When the blood uric acid results do not reflect how you feel.
  • When your test strips have been exposed to extreme temperatures (see UASure Blood Uric Acid Test Strip Insert for operation ranges).
  • To practice the test procedure.

 

IMPORTANT:

  • The acceptable range for the control solution is listed on the package of test strips.
  • Use only the UASure® Uric Acid Control Solution.
  • Always check the expiration date. DO NOT use control solution if expired.
  • Newly opened bottle of control solution must be marked with the date opened; discard any unused control solution three months after opening or expiration date.
  • Control solutions should be refrigerated after use. DO NOT FREEZE. When control solutions needs to be used again, allow it to stand under room temperature at least 30 minutes before use.
  • If a control solution test is not within the expected range that is printed on the test strip package, DO NOT use the system to test.  Repeat the test until a control solution test performs within the expected range. If the results continue falling outside the expected range, call the authorised dealer for service.
  • DO NOT touch the test area with the tip of the control solution bottle.
  • DO NOT apply a second drop of control solution to the test strip.
  • Replace the bottle cap on the control solution bottle immediately after use.

IME-Fine Lancets 30G (100/box)

I-1378
!

Ultra Thin 30G (0.3 mm) IME-Fine Lancets allow virtually painless finger pricking whilst drawing sufficient blood to ensure test strip coverage and test accuracy.

For personal use only.  Otherwise use single use lancets if the machine is to be used on more than one individual.

  • IME-DC Ultra Thin 30G IME-Fine Lancets have a tri-bevel, thin gauge needle for comfort.
  • Compatible with most popular lancing devices.
  • 100 pieces/box.  
  • Single use.
  • Finest surgical sterile stainless steel.